OpenBSD on an IBM ThinkPad T42

Model:  2373-M1U
Original Description:

  • Intel Pentium M 745 (Dothan 1.8GHz)
  • *512MB RAM (upgraded to 1GB)
  • *80GB 5400RPM HDD (upgraded to 120GB HDD)
  • 14.1" SXGA+ (1400x1050) TFT LCD
  • 64MB ATI Radeon 9600
  • Intel PRO/1000MT mobile gigabit ethernet
  • *IBM 802.11a/b/g wireless (replace with Ralink 802.11b/g)
  • TCPA secure chip
  • built-in winmodem, bluetooth, fingerprint reader (not working)


OpenBSD 4.4 (GENERIC) #1019: Wed Aug  6 13:24:57 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem  = 1072656384 (1022MB)
avail mem = 1028788224 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
bios0: IBM 2373M1U
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 79%
apm0: AC on, battery charge high, charging
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1800 MHz (1276 mV): speeds: 1800, 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
radeondrm0 at vga1: ATI Radeon RV350 Mobility 9600 M10 NP(0), 1.29.0 20080613
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11, address 00:11:25:30:9c:86
ral0 at pci2 dev 2 function 0 "Ralink RT2860" rev 0x00: irq 11, address 00:0e:8e:1d:f2:db
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (2T3R)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM121HC>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0201> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
scsibus1 at softraid0: 1 targets, initiator 1
sd0 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd0: 87712MB, 11181 cyl, 255 head, 63 sec, 512 bytes/sec, 179635601 sec total
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs
auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
current xorg.conf: 

Section "ServerLayout"
	Identifier "X.org Configured"
	Screen "Screen0"
	InputDevice "Mouse0" "CorePointer"
	InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
	Option "DontZap" "on"
	Option "DontZoom" "on"
EndSection

Section "Files"
	RgbPath "/usr/X11R6/lib/X11/rgb"
	ModulePath "/usr/X11R6/lib/modules"
	FontPath "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath "/usr/X11R6/lib/X11/fonts/OTF/"
	FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath "/usr/local/lib/X11/fonts/ghostscript/"
	FontPath "/usr/local/lib/X11/fonts/misc/"
	FontPath "/usr/local/lib/X11/fonts/terminus/"
	FontPath "/usr/local/lib/X11/fonts/jmk/"
	FontPath "/usr/local/lib/X11/fonts/artwiz-aleczapka/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "ddc"
	Load  "vbe"
	Load  "extmod"
	Load  "glx"
	Load  "drm"
	Load  "dri"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "bitmap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier "Keyboard0"
	Driver "kbd"
	Option "XkbOptions" "ctrl:nocaps"
EndSection

Section "InputDevice"
	Identifier "Mouse0"
	Driver "mouse"
	Option "Protocol" "wsmouse"
	Option "Device" "/dev/wsmouse"
	Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier "Internal LCD"
	Option "DPMS"
EndSection

Section "Device"
	Identifier "Card0"
	Driver "ati"
	VendorName "ATI Technologies Inc"
	BoardName "Radeon Mobility M10 NP"
	BusID "PCI:1:0:0"

	Option "DynamicClocks" "on"
	Option "BIOSHotkeys" "on"

	Option "BusType" "AGP"
	Option "AGPMode" "4"
	Option "AccelMethod" "EXA"
	Option "RenderAccel" "on"
	Option "MigrationHeuristic" "greedy"
	Option "ColorTiling" "on"
	Option "EnablePageFlip" "on"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device "Card0"
	Monitor "Internal LCD"
	DefaultDepth 24
	SubSection "Display"
		Depth 24
		Modes "1400x1050"
		Virtual 2880 1050
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection
others: ThinkPad X31 ThinkPad X40,